Arctic Cooling Freezer i13 X chladič CPU(ACFRE00078A)

ARCTIC Freezer i13 X kompaktní CPU chladič (Socket Intel LGA1200, LGA115x)



• Bezpečné uchycení

• Předem nanesená tepelná pasta MX-2

• Prodloužená životnost díky nízké teplotě motoru

• Nižší spotřeba energie a menší vibrace s novými

technologie motoru

• Ofsetové tepelné potrubí zajišťuje optimální odvod tepla

• Směrovaný proud vzduchu pro lepší chlazení



Freezer i13 X - připraven chladit procesor Intel



ARCTIC Freezer i13 X je kompaktní chladič CPU s jedním ventilátorem 92 mm. Využívá vylepšeného designu chladiče a přepracovaného

rozložení tepelného potrubí. Ve spojení s ventilátorem, který je optimalizován pro vysoký statický tlak, se ARCTIC podařilo výrazně

zlepšit chladicí výkon Freezer i13 X‘. Je dodáván s předem nanesenou tepelnou směsí ARCTIC MX-2 a má jednoduchý

montážní systém.



Specifikace



Heat Pipe Direct Touch Průměr 6 mm x 3

Hliníkové žebrování chladiče x 44 Tloušťka: 0,4 mm

Předběžně nanesena tepelná směs MX-2

Rozměry 85,5 (L) x 108,5 (W) x 137 (H) mm

Hmotnost 425 g

Kompatibilita Intel® 1200, 115x

Omezení RAM není omezeno

Ventilátor 1 x 92 mm, 300–2000 ot / min (řízeno PWM)

Proud / Napětí 0,07 A / 12 V

Ložiska FDB ložisko

Hluk na úrovni 0,3

Konektor 4kolíkový konektor



ARCTIC Freezer i13 X - Compact Intel CPU Cooler



• Secure hold with backplate

• Pre-applied MX-2 thermal paste

• Extended lifespan thanks to low motor temperature

• Lower power consumption and less vibration with new

motor technology

• Offset heat pipes ensure optimal heat dissipation

• Focused airstream for imprved cooling performance



Here is the Freezer i13 X – Ready to cool your Intel CPU

The ARCTIC Freezer i13 X is a compact CPU cooler with one 92mm fan. It benefits from an improved heatsink design and a reworked

heat pipe layout. In conjunction with the fan, which is optimised for high static pressure, ARCTIC was been able to significantly

improve the Freezer i13 X‘s cooling performance. It is supplied with pre-applied ARCTIC MX-2 thermal compound and has a simple

assembly system.



Specifications



Heat Pipe Direct Touch Ř 6 mm x 3

Heatsink Aluminium Fins x 44 Thickness: 0.4 mm

Thermal Compound MX-2 pre-applied

Dimensions 85.5 (L) x 108.5 (W) x 137 (H) mm

Weight 425 g

Compatibility Intel® 1200, 115x

RAM Clearance no limit

Fan 1 x 92 mm, 300–2000 RPM (Controlled by PWM)

Current/Voltage 0.07 A/12 V

Bearings Fluid Dynamic Bearing

Noise Level 0.3 Sone

Connector 4-pin connector



Small Footprint for optimal Compatibillity

The Freezer i13 X combines a compact advanced heat sink

design with 3 direct touch heat pipes. In combination with the

fan designed for static pressure, an optimal cooling performance

is achieved despite the comparatively small dimensions. The

Freezer i13 X has an installation height of only 137 mm and

there are no limitations in RAM compatibility.



Pre-applied MX-2 Thermal Paste

Pre-applied, high-performing MX-2 thermal paste ensures

quick and clean assembly.



Longer Lifespan thanks to its Low Motor Temperature

The Freezer i13 X uses a fan motor newly developed by ARCTIC.

This runs less audibly and more efficiently, so that the temperature

of the coils is 20 °C lower than with conventional motors.

This increases the lifespan of the fans considerably, allowing

ARCTIC to grant a 6-year warranty period for the Freezer i13 X.



Offset Heat Pipes enable Optimal Heat Dissipation

The direct touch heat pipes attached to the Freezer i13 X and

an optimised design of the 44 cooling fins together ensure that

the heat from the CPU can be ideally removed and released

into the air.



P-fan for Increased Performance

Inspired by the P-series, the Freezer i13 X’s fan benefits from

all of the advantages of P-fans:

• High static pressure for increased cooling performance

• Broad RPM range

• Lower power consumption

• Less vibration

• PWM for synchronous fan control

For additional information about the P-fans, we recommend

our FAQ.



Fluid Dynamic Bearing

Thanks to a combination of alloy and lubricant developed in

Germany, the friction within the bearing is reduced, leading to

greater efficiency. In this way, less heat is generated, there is

less bearing noise and the life of the fan is extended.



Direct Touch Heat Pipes

The Freezer i13 X uses direct touch heat pipes. This ensures

that the heat to be dissipated is transferred directly to the heat

pipes without an additional material layer, and transported into

the heatsink via the pipes.



More Cooling Capacity with Freezer i13 X

The ARCTIC Freezer i13 X sets new standards in cooling.

Proven to outperform its predecessor in cooling capacity.



More Efficient and Whisper Quiet

In addition to operating more quietly, even at maximum speed,

the Freezer i13 X’s built-in fan motor is also much more efficient.

The power consumption was reduced from 0.18 A to 0.07 A,

which corresponds to an effective savings of 60 % in power

consumption. ARCTIC engineers were also able to reduce

the volume by 40 %, allowing the Freezer i13 X to run at a

whisper-quiet 0.3 sone when at maximum speed.



Multilingual Manuals

ARCTIC offers a regularly updated user manual in many languages

conveniently at your fingertips anywhere and anytime.

Put the QR code sticker in an easy-to-reach place and never

again waste time searching for product instructions.